- Additional information
- Reviews (0)
This handwheel is for use with the VX20W wagon vise only and is cast from 356-T6 aluminum. The hub is precision bored and cross drilled and the rim is polished to a high luster. The handwheel diameter is 5″. Includes stainless steel quick release pin with spring detent. A smaller 7/16″ diameter split ring is included if you you would rather have a smaller less obtrusive ring.
|Dimensions||6 × 6 × 6 in|
Black, Blue, Indigo
Large, Medium, Small
Jaw Liner0 out of 5
- Rubber / cork material.
- 3/32” thick.
- High friction.
- Conforms to uneven surfaces.
- Two sizes available
- 5 X 18 – Enough to line both leg vise faces
- 6 X 36 – Enough to line the moveable face vise jaw
Maple Handle and Knobs0 out of 5
- Replacement wooden handle and knobs. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Drill Guide With Long Drill Bit for X Link Installation0 out of 5
- Hardened steel drill bushing press fit into aluminum base.
- Simply clamp to the front jaw and drill using powered hand drill.
Small Turned Finish Square Profile Hand Wheel and Quick Release Pin0 out of 5
- 6″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large turned finish square profile hand wheel design used with the VX20 leg vise or VX20F face vise.
Wooden Hub and Handle with Quick Release Pin for all VX Series Vises0 out of 5
- Solid maple construction.
- Precision threaded handle and knobs.
- Leather bolsters.
- Stainless steel quick release pin.
Vise Grease0 out of 5
- Same high-quality grease we use to assemble all of our vises.
- Convenient 0.5-ounce container, easy to keep within reach of your vise
Large Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises0 out of 5
- 8″ diameter hand wheel.
- Matches the small hand wheel design used with the VX20W wagon vise.
Large Turned Finish Square Profile Hand Wheel with Quick Release Pin0 out of 5
- 8″diameter turned finish square profile hand wheel.
- Matches the small 6” diameter turned finish square profile hand wheel design used with the VX20W wagon vise.
Maple Clamp Hub0 out of 5
- Replacement wooden clamp hub. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Single Handle Cap with Quick Release Pin0 out of 5