Home admin 2022-09-26T16:08:43+00:00
VX21 Leg Vise
Quick action patent pending mechanism
Three times higher mechanical advantage
No grease or oil on clamp shaft
Easily removable clamp shaft
Ruggedized design
Small footprint
$ 200.00 – $ 411.00
VX 21 Wagon Vise | End Vise | Tail Vise
Quick action patented release handle
Easy installation
Traditional appearance
Metal or wooden handle options
Instructions :
PDF Download
$ 230.00 – $ 290.00
Face Vise | Bench Vise (Twin Screw Vise Alternative)
Quick action patented release handle
No oil or grease needed
Rack free clamping
Clear drop through, clamping up to 24″
Metal or wooden handle options
$ 350.00 $ 335.00
Jaw Liner
Rubber / cork material.
3/32” thick.
High friction.
Conforms to uneven surfaces.
Two sizes available
5 X 18 – Enough to line both leg vise faces
6 X 36 – Enough to line the moveable face vise jaw
$ 9.00 – $ 21.00
Vise Grease
Same high-quality grease we use to assemble all of our vises.
Convenient 0.5-ounce container, easy to keep within reach of your vise
$ 2.00
Large Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises
8″ diameter hand wheel.
When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
Matches the small hand wheel design used with the VX20W wagon vise.
$ 75.00
Slotted Bearing Option For VX20F Face Vise
Fits VX20F Face Vise
Mounts in a 2-1/2″ diameter counter – bore in vise front jaw.
Simplifies front jaw construction.
Close fit to shaft reduces vertical racking.
$ 35.00 $ 30.00
Wooden Hub and Handle with Quick Release Pin for all VX Series Vises
Solid maple construction.
Precision threaded handle and knobs.
Leather bolsters.
Stainless steel quick release pin.
$ 45.00
Single Handle Cap with Quick Release Pin
This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
$ 25.00
Maple Handle and Knobs
Replacement wooden handle and knobs. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
$ 20.00
Maple Clamp Hub
Replacement wooden clamp hub. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
$ 25.00
Drill Guide With Long Drill Bit for X Link Installation
This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
Hardened steel drill bushing press fit into aluminum base.
Simply clamp to the front jaw and drill using powered hand drill.
$ 33.00
WELCOME TO HOVARTER CUSTOM VISE