-
Select optionsQuick ViewJaw Liner
$9.00 – $21.00- Rubber / cork material.
- 3/32” thick.
- High friction.
- Conforms to uneven surfaces.
- Two sizes available
- 5 X 8 – Enough to line both leg vise faces
- 6 X 36 – Enough to line the moveable face vise jaw
Select optionsQuick View -
Add to cartQuick ViewLarge Turned Finish Square Profile Hand Wheel with Quick Release Pin
$70.00- 8″diameter turned finish square profile hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small 6” diameter turned finish square profile hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewSmall Turned Finish Square Profile Hand Wheel and Quick Release Pin
$58.00- 6″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large turned finish square profile hand wheel design used with the VX20 leg vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewWagon Vise | End Vise | Tail Vise
$185.00- Quick action patented release handle
- Easy installation
- Traditional appearance
- Metal or wooden handle options
Add to cartQuick View -
Add to cartQuick ViewLeg Vise
$140.00- Quick action patented release handle
- No oil or grease needed
- Metal or wooden handle options
- Add X Link to eliminate the lower pin board creating the ultimate quick action leg vise
Add to cartQuick View -
Add to cartQuick ViewSmall hand wheel and quick release pin for VX20W wagon vise
- 5″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large hand wheel design used with the VX20 leg vise or VX20F face vise.
$70.00$60.00Add to cartQuick View -
Select optionsQuick ViewFace Vise | Bench Vise (Twin Screw Vise Alternative)
- Quick action patented release handle
- No oil or grease needed
- Rack free clamping
- Clear drop through, clamping up to 24″
- Metal or wooden handle options
$350.00$320.00Select optionsQuick View -
Add to cartQuick ViewLarge Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises
$75.00- 8″ diameter hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewSlotted Bearing Option For VX20F Face Vise
- Fits VX20F Face Vise
- Mounts in a 2-1/2″ diameter counter – bore in vise front jaw.
- Simplifies front jaw construction.
- Close fit to shaft reduces vertical racking.
$35.00$30.00Add to cartQuick View -
Add to cartQuick ViewWooden Hub and Handle with Quick Release Pin for all VX Series Vises
$45.00- Solid maple construction.
- Precision threaded handle and knobs.
- Leather bolsters.
- Stainless steel quick release pin.
Add to cartQuick View -
Add to cartQuick ViewSingle Handle Cap with Quick Release Pin
$25.00This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
Add to cartQuick View -
Add to cartQuick ViewX Link Scissors Mechanism
$95.00- Use with the VX20 leg vise.
- Fully supports the jaw and eliminates the need to adjust a pin in the lower pin board.
- Unique spherical bearing simplifies installation.
- Easily remove X Link by removing one bolt.
Add to cartQuick View
WELCOME TO HOVARTER CUSTOM VISE|
0 items0
