Vise Grease
$2.00
- Same high-quality grease we use to assemble all of our vises.
- Convenient 0.5-ounce container, easy to keep within reach of your vise
- Description
- Additional information
Description
This 0.5-ounce container of high pressure grease is perfect to store near your vise to make greasing your vise easy and convenient. Contains enough grease numerous applications. This grease is also used for greasing the rack on the face vise. Great for woodworkers who don’t want to buy a large container of grease just for their vise.
- Same high-quality grease we use to assemble all of our vises.
- Convenient 0.5-ounce container, easy to keep within reach of your vise
Additional information
| Size | 5 X 18″, 6 X 36″ |
|---|
Related Products
-
Add to cartQuick ViewSlotted Bearing Option For VX20F Face Vise
$30.00- Fits VX20F Face Vise
- Mounts in a 2-1/2″ diameter counter – bore in vise front jaw.
- Simplifies front jaw construction.
- Close fit to shaft reduces vertical racking.
Add to cartQuick View -
Add to cartQuick ViewSingle Handle Cap with Quick Release Pin
$25.00This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
Add to cartQuick View -
Select optionsQuick ViewVX 21 Wagon Vise | End Vise | Tail Vise
$230.00 – $290.00- Quick action patented release handle
- Easy installation
- Traditional appearance
- Metal or wooden handle options
Instructions:
Select optionsQuick View -
Add to cartQuick ViewLarge Turned Finish Square Profile Hand Wheel with Quick Release Pin
$70.00- 8″diameter turned finish square profile hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small 6” diameter turned finish square profile hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewMaple Clamp Hub
$25.00- Replacement wooden clamp hub. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewLarge Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises
$75.00- 8″ diameter hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewWooden Hub and Handle with Quick Release Pin for all VX Series Vises
$45.00- Solid maple construction.
- Precision threaded handle and knobs.
- Leather bolsters.
- Stainless steel quick release pin.
Add to cartQuick View -
Add to cartQuick ViewSmall hand wheel and quick release pin for VX20W wagon vise
$60.00- 5″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large hand wheel design used with the VX20 leg vise or VX20F face vise.
Add to cartQuick View -
Select optionsQuick ViewJaw Liner
$9.00 – $21.00- Rubber / cork material.
- 3/32” thick.
- High friction.
- Conforms to uneven surfaces.
- Two sizes available
- 5 X 18 – Enough to line both leg vise faces
- 6 X 36 – Enough to line the moveable face vise jaw
Select optionsQuick View
