Small Turned Finish Square Profile Hand Wheel and Quick Release Pin
$58.00
- 6″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large turned finish square profile hand wheel design used with the VX20 leg vise or VX20F face vise.
- Description
Description
For use with VX20W wagon vise
This handwheel is for use with the VX20W wagon vise only and is cast from 356-T6 aluminum. The hub is precision bored and cross drilled and the rim is a fine turned finish. The handwheel diameter is 6″. Includes stainless steel quick release pin with spring detent. A smaller 7/16″ diameter split ring is included if you would rather have a smaller less obtrusive ring.
- 6″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large turned finish square profile hand wheel design used with the VX20 leg vise or VX20F face vise.
Related Products
-
Add to cartQuick ViewLarge Turned Finish Square Profile Hand Wheel with Quick Release Pin
$70.00- 8″diameter turned finish square profile hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small 6” diameter turned finish square profile hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Select optionsQuick ViewJaw Liner
$9.00 – $21.00- Rubber / cork material.
- 3/32” thick.
- High friction.
- Conforms to uneven surfaces.
- Two sizes available
- 5 X 18 – Enough to line both leg vise faces
- 6 X 36 – Enough to line the moveable face vise jaw
Select optionsQuick View -
Add to cartQuick ViewWooden Hub and Handle with Quick Release Pin for all VX Series Vises
$45.00- Solid maple construction.
- Precision threaded handle and knobs.
- Leather bolsters.
- Stainless steel quick release pin.
Add to cartQuick View -
Add to cartQuick ViewDrill Guide With Long Drill Bit for X Link Installation
$33.00- This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
- Hardened steel drill bushing press fit into aluminum base.
- Simply clamp to the front jaw and drill using powered hand drill.
Add to cartQuick View -
Add to cartQuick ViewMaple Handle and Knobs
$20.00- Replacement wooden handle and knobs. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewSmall hand wheel and quick release pin for VX20W wagon vise
$60.00- 5″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large hand wheel design used with the VX20 leg vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewSingle Handle Cap with Quick Release Pin
$25.00This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
Add to cartQuick View -
Add to cartQuick ViewSlotted Bearing Option For VX20F Face Vise
$30.00- Fits VX20F Face Vise
- Mounts in a 2-1/2″ diameter counter – bore in vise front jaw.
- Simplifies front jaw construction.
- Close fit to shaft reduces vertical racking.
Add to cartQuick View -
Add to cartQuick ViewMaple Clamp Hub
$25.00- Replacement wooden clamp hub. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewLarge Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises
$75.00- 8″ diameter hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small hand wheel design used with the VX20W wagon vise.
Add to cartQuick View
