Drill Guide With Long Drill Bit for X Link Installation
$33.00
- This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
- Hardened steel drill bushing press fit into aluminum base.
- Simply clamp to the front jaw and drill using powered hand drill.
- Description
- Additional information
- Reviews (0)
Description
This optional drill guide combined with a long drill bit makes the X Link installation simple and easy. Just clamp to the side of the vise jaw or leg and easily drill a through hole up to 9″ deep. If you return the drill guide and bit we will refund your purchase price! The drill guide is 3/8″ thick by 1-1/2″ wide by 3″ long. The hardened steel drill bushing is conveniently located 1″ from the end of the guide and 3/4″ from the sides. The 3/8″ diameter drill bit is 6-3/4″ long.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
| Color | Black, Blue, Indigo |
| Size | Large, Medium, Small |
Be the first to review “Drill Guide With Long Drill Bit for X Link Installation”
You must be logged in to post a review.
Related Products
-
Add to cartQuick ViewVise Grease
$2.00- Same high-quality grease we use to assemble all of our vises.
- Convenient 0.5-ounce container, easy to keep within reach of your vise
Add to cartQuick View -
Add to cartQuick ViewLarge Hand Wheel with quick release pin for use with VX20 leg and VX20F face vises
$75.00- 8″ diameter hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewMaple Handle and Knobs
$20.00- Replacement wooden handle and knobs. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewLarge Turned Finish Square Profile Hand Wheel with Quick Release Pin
$70.00- 8″diameter turned finish square profile hand wheel.
- When used with VX20F face vise it requires minimum 2-1/2″ thick bench top so hand wheel won’t protrude above bench top.
- Matches the small 6” diameter turned finish square profile hand wheel design used with the VX20W wagon vise.
Add to cartQuick View -
Add to cartQuick ViewMaple Clamp Hub
$25.00- Replacement wooden clamp hub. Order the complete wooden hub and handle with quick release pin for use with VX20 leg vise, VX20W wagon vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewSmall hand wheel and quick release pin for VX20W wagon vise
$60.00- 5″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large hand wheel design used with the VX20 leg vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewSingle Handle Cap with Quick Release Pin
$25.00This optional drill guide combined with a long drill bit makes the X Link installation simple and easy.
Add to cartQuick View -
Add to cartQuick ViewSmall Turned Finish Square Profile Hand Wheel and Quick Release Pin
$58.00- 6″ diameter hand wheel.
- Smaller size won’t protrude above bench top.
- Matches the large turned finish square profile hand wheel design used with the VX20 leg vise or VX20F face vise.
Add to cartQuick View -
Add to cartQuick ViewX Link Scissors Mechanism
$103.00- Use with the VX20 leg vise.
- Fully supports the jaw and eliminates the need to adjust a pin in the lower pin board.
- Unique spherical bearing simplifies installation.
- Easily remove X Link by removing one bolt.
Add to cartQuick View -
Add to cartQuick ViewWooden Hub and Handle with Quick Release Pin for all VX Series Vises
$45.00- Solid maple construction.
- Precision threaded handle and knobs.
- Leather bolsters.
- Stainless steel quick release pin.
Add to cartQuick View
Reviews
There are no reviews yet.